trigger_multiple


caboose
04-29-2006, 03:02 PM
ok i created a trigger multiple.
set it to delay before reset of 1.
i output:
on trigger, explosion 1, explode.

now this sets off the explosion. but then wont trigger ever again.

i tried setting delay to zero and that just means when i run through the trigger, i get the explosion to go off about 30 times!

how do i get a trigger multiple to actually trigger multiple times, with a delay of about a second

ultranew_b
04-29-2006, 03:13 PM
Hi caboose,

Check out the forums over at HL2World.com:

http://www.hl2world.com/bbs/beginner-mapping-help-vf51.html?sid=c642c5859883e2ff5a2f3c3cdcf7c3cb

This is the place to search for answers first.

:)

Ace_McGirk
04-29-2006, 03:49 PM
check the "explosion 1" entity properties, on the flags tab, see if there is a setting for "repeatable" or something like that( maybe its a "fire once")?

Sheeprider
04-30-2006, 03:13 AM
Yeah, check that your explosion entity is not set to only work once. Also there´s a setting for how long it takes before it can be used again...

Also your outputs should have a setting for trigger once or whatever, but it shouldn´t be on by default...

pluckster
04-30-2006, 12:20 PM
yeah i did that my first time too. all the other soudns and triggers worked but the explosion wouldnt work

Day of Defeat Forum Archive created by Neil Jedrzejewski.

This in an partial archive of the old Day of Defeat forums orignally hosted by Valve Software LLC.
Material has been archived for the purpose of creating a knowledge base from messages posted between 2003 and 2008.