Glimsharp's is mp44


[GIMP]-Cochise-
06-05-2004, 12:40 PM
I've been converting or trying to convert some of Glimsharp's IS to DOD 1.2. Some are working perferct. Then there are others like the mp44 which I was able to add new hands and axis sleeves in the reference file itself. Then when I removed the axis smd from the reference file and added the $bodygroup "sleeve" portion into the qc file it ends up failing. Can someone help me out with this. I don't mind using it now with just the axis sleeves. Anyway here's a pic!!!

[DF]Panzershrek
06-05-2004, 10:20 PM
Wow--lets get this dude some help. :D

Silverghost
06-06-2004, 02:04 AM
it should look something liek this
// reference meshes
$body gun "reference"

$bodygroup sleeve
{
studio "us_sleeve"
studio "brit_sleeve"
studio "axis_sleeve"
}

[GIMP]-Cochise-
06-06-2004, 08:45 AM
Originally posted by Silverghost
it should look something liek this
// reference meshes
$body gun "reference"

$bodygroup sleeve
{
studio "us_sleeve"
studio "brit_sleeve"
studio "axis_sleeve"
}

Yes, I've tried that and yet I'm still getting errors. Anyway I'll still try to test every hand.smd and sleeve.smd file until I get it right.

Gunther Gr00nz
06-06-2004, 09:32 AM
Where can I get a working 1.2 IS (irongsights) KAR/Enfield/K43/Carbine/Garand (rifles)? Tried searching and notta!

Editor321
06-06-2004, 11:40 AM
i can help ya out.

contact me using an IM service like:

MSN Messenger: thomasrogers207@hotmail.com
AIM:MrLuftWaffles

Silverghost
06-06-2004, 12:22 PM
make sure the names of your .smd's match whats in the .qc file.

[GIMP]-Cochise-
06-06-2004, 10:44 PM
Originally posted by Editor321
i can help ya out.

contact me using an IM service like:

MSN Messenger: thomasrogers207@hotmail.com
AIM:MrLuftWaffles

Hey Editor...I've sent you an e-mail containing the mp44. Just wondering if you got it

Editor321
06-07-2004, 06:54 AM
yeah i got em, didnt think u sent em to that hotmail, account, i hardly ever check it, ill take a look at them today

[GIMP]-Cochise-
06-07-2004, 10:54 PM
Originally posted by Editor321
yeah i got em, didnt think u sent em to that hotmail, account, i hardly ever check it, ill take a look at them today


Many thanks, but I hate to be a pest. Could you add Marzy's para brit sleeves instead of the default. Thanks again!!!

By the way what did you think about the IS 30Cal.

gabagoo
06-07-2004, 11:51 PM
Originally posted by [GIMP]-Cochise-
I've been converting or trying to convert some of Glimsharp's IS to DOD 1.2. Some are working perferct. Then there are others like the mp44 which I was able to add new hands and axis sleeves in the reference file itself. Then when I removed the axis smd from the reference file and added the $bodygroup "sleeve" portion into the qc file it ends up failing. Can someone help me out with this. I don't mind using it now with just the axis sleeves. Anyway here's a pic!!!
can you release the ones you got working so far! ? ?!!!

Editor321
06-08-2004, 04:34 PM
i couldnt get the IS 30cal off the attachment

as for the sleeves, ill put it on my to-do list

[GIMP]-Cochise-
06-08-2004, 10:09 PM
Originally posted by Editor321
i couldnt get the IS 30cal off the attachment

as for the sleeves, ill put it on my to-do list

I've sent the IS 30Cal mg once again, hope you get it this time.

No rush with the sleeves, thanks.

gabagoo
06-08-2004, 10:19 PM
Originally posted by gabagoo
can you release the ones you got working so far! ? ?!!!

[GIMP]-Cochise-
06-08-2004, 10:45 PM
Originally posted by gabagoo


I'll try to send the iron sights and also what I call alternate iron sights where your not aiming directly down the barrel but, you're using the front sight as your aim. Here's a pic of what I mean.

Editor321
06-09-2004, 06:04 AM
just an update, i cant seem to get that 30cal off the attachment.

do u have msn :)? or AIM would make it easier than emails back and forth.

and i will be doing the sleeves after school today, if i have no more computer problems :p

[GIMP]-Cochise-
06-09-2004, 10:25 PM
Originally posted by Editor321
just an update, i cant seem to get that 30cal off the attachment.

do u have msn :)? or AIM would make it easier than emails back and forth.

and i will be doing the sleeves after school today, if i have no more computer problems :p

Just installed AIM, and I will try to send you the file.

[GIMP]-Cochise-
06-10-2004, 10:21 PM
Originally posted by Editor321
just an update, i cant seem to get that 30cal off the attachment.

do u have msn :)? or AIM would make it easier than emails back and forth.

and i will be doing the sleeves after school today, if i have no more computer problems :p


Editor I sent you the IS 30Cal mg via
AIM. Let me know if you received it.

Editor321
06-11-2004, 04:02 PM
got it, im using it :)

BillyNair
06-13-2004, 05:48 PM
Originally posted by [GIMP]-Cochise-
I'll try to send the iron sights and also what I call alternate iron sights where your not aiming directly down the barrel but, you're using the front sight as your aim. What are the commands for moving the front sight over with out shifting the whole gun. "$origin" makes the back rotate around the front, I just want to move the front sights.

[GIMP]-Cochise-
06-13-2004, 09:29 PM
Originally posted by BillyNair
What are the commands for moving the front sight over with out shifting the whole gun. "$origin" makes the back rotate around the front, I just want to move the front sights.

You need to inport the reference file into Milshape. Select the weapon by group, then play around with the origins in the rotate field. That is the only way I know how of angling the weapon.

BillyNair
06-13-2004, 10:51 PM
I was afraid of that...
I was hoping it was going to be easier (well just a few commands or something)
Not entirely required.
Anyway, in the mean time, where are some other weapons you or others have with that implemented. I had a few back before retail and liked them a lot, except they were just barely out of the cross, that way the model looked like it was almost to the center, but never actualy covered the crosses.

Until I decide to spend time learning modeling (fall I might have a few extra slots to stick in a multi media class) i will just play with the $origin.

[GIMP]-Cochise-
06-19-2004, 02:56 PM
Originally posted by Editor321
got it, im using it :)

So what do you think of the 30cal iron sight.

BTW any luck with Marzy's sleeves on the mp44.

Andy Whyberd
06-19-2004, 04:49 PM
I think this is his MP44 and i fixed it so it has sleeves.

Credits:

Axis Sleeves : Vandori
USA Sleeves: Dillinger
British Sleeves: Marzy
Model: Glimpsharp
Skin: Glimpsharp

Picture (http://uploads.dodart.net/uploads/mp44pics.jpg)

Click here to download v_mp44.mdl (http://files.dodnetwork.com/download.php?userid=7&imagel=v_mp44.mdl)

Capt. Glimsharp
06-20-2004, 04:15 PM
How I loved animating those Ironsight Models :)

Nice to see they are still appreciated :)

Andy Whyberd
06-20-2004, 05:20 PM
Glimsharp was that ur MP44 or was i wrong?

Day of Defeat Forum Archive created by Neil Jedrzejewski.

This in an partial archive of the old Day of Defeat forums orignally hosted by Valve Software LLC.
Material has been archived for the purpose of creating a knowledge base from messages posted between 2003 and 2008.